LIQUID ORGANIC FERTILIZER OF PLANT AND ANIMAL ORIGIN
TURKUVAZ BAT POWER
GUARANTEED CONTENT (WW)
ORGANIC MATTER: 25%
ORGANIC CARBON: 7%
TOTAL NITROGEN (N): 2%
WATER SOLUBLE POTASSIUM OXIDE ($\text{K}_2\text{O}$): 5%
TOTAL PHOSPHORUS PENTOXIDE ($\text{P}_2\text{O}_5$): 1%
TOTAL HUMIC ACID + FULVIC ACID: 3%
pH RANGE: 5–7
MAXIMUM EC (dS/m): 17
WATER SOLUBLE CaO: 1%
RAW MATERIALS USED IN PRODUCTION:
Bat guano and plant-based materials
AREA, TIME AND DOSAGE OF USE
Amateur Applications
(Note: One water glass is 200 cc. Use a syringe for smaller ratios.)
For fruit trees and trees such as pistachio, citrus, fig, olive, and walnut, apply a dilution of 400–500 cc of Turkuvaz Bat Power in 5 liters of water per tree to the soil, reaching the leaf canopy projection, once every 25–30 days, starting from the beginning of flowering until the end of harvest, for at least 3 times.
For ornamental trees, apply the same dilution via the root once every 55–60 days during spring and summer months.
For plants such as tomato, pepper, eggplant, cucumber, zucchini, watermelon, melon, strawberry, blackberry, raspberry, aronia, parsley, cress, arugula, dill, etc., mix 1 liter of fertilizer into 20 liters of water and apply this dilution from the soil, in a quantity of 1 water glass, every 5–7 days starting from planting. Increase the quantity to 2 water glasses for fruiting plants when they start to flower. Continue until the end of harvest. Continue with 1 water glass for leafy plants.
For potted and garden flowers, dilute 1 liter of fertilizer in 20 liters of water and apply from the soil once every 25–30 days, using 1 water glass, or 2 water glasses for pots larger than 10 liters.
The foliar application rate for all plants is 10 cc per 1 liter of water. Apply by spraying every 10–15 days during cool hours.
For newly planted saplings, dilute 200–250 cc of fertilizer with 5 liters of water and apply via the root once every 30–35 days during spring and summer months, for at least 3 times. In green areas, apply a mixture of 5 liters of water + 200 cc liquid fertilizer to 1 m² area close to the evening hours after every mowing.
PROFESSIONAL APPLICATIONS
In Drip Irrigation Systems:
For all vegetables, watermelon, melon, etc. plants, apply to 1000 m2 once every 7–10 days: 2–3 liters during the seedling stage, 3–4 liters during flowering, and 4–5 liters during fruit formation and throughout harvest, at the end of irrigation.
For plants such as strawberry, raspberry, blackberry, aronia, apply 2–3 liters per decare via drip irrigation every 7–10 days when leaves open. Also, apply foliar application every 10–15 days.
In ornamental plants; for flowers such as rose, cactus, orchid, carnation, and other cut flowers, apply 1–2 liters after planting, 2–3 liters during the development stage, once every 10–15 days until harvest.
For all fruit trees (such as pistachio, citrus, fig, olive, and walnut), apply 3–4 liters per decare when flowering begins, and 4–5 liters per decare during fruit formation and seed or shell hardening period, for at least 3 times until harvest via drip irrigation.
For all newly planted saplings, start with 2–3 liters per decare via the drip system as "first watering." Continue every 30–35 days in spring and summer months. In drip irrigation, the system is shut down after the fertilizer is applied towards the end of the watering. Drip applications should be given with a mixture of 50–60 liters of water.
Foliar application for vegetables and ornamental plants is done by mixing 10 cc per 1 liter of water, spraying once every 10–15 days, close to the evening hours until the leaves are wet.
For tropical climate trees such as banana, kiwi, avocado, etc., start with 4–5 liters per decare before fertilization. Give via drip or other irrigation systems every 10–12 days. Additionally, foliar application should be done every 10–15 days.
Foliar application for fruit trees (quince, apple, pear, cherry, plum, pistachio, citrus, fig, olive, walnut) should be done after flowering during the fertilization period, seed and shell hardening period, and fruit development period. In addition, one foliar and drip application after harvest will rest the tree and prepare it for the next year.
For cereals such as wheat, sunflower, barley, rye, corn, lentils, chickpeas, etc., when the plant is about a span high (tillering stage), a mixture of 20 liters of fertilizer in 1 ton of water is prepared and applied foliarly at least twice, as far as it can cover 20–25 decares of land. In cereal fields with an irrigation system, apply an additional 2 liters per decare via drip or sprinkler system when the plant has 4–5 leaves, every 15–20 days.
For tuberous plants such as potato, onion, garlic, beet, carrot, peanut, when they are about a span high, apply 2–3 liters per decare every 15–20 days by putting it into the fertilizer tank of the sprinkler system, towards the end of irrigation. Clean water is run through for the last 10–15 minutes and the system is shut down. At least 4–5 applications are made.
For hazelnut trees, the soil application dilution ratio is 500 cc of Turkuvaz Bat Power mixed into 20 liters of water, applied at the beginning of March. 5–6 liters of the prepared dilution should fall per clump, reaching the leaf canopy projection. Repeat in mid-May. If the terrain is suitable, you can increase the ratio according to the water volume of the irrigation tank and use it like hose irrigation. For hazelnut trees, a foliar application dilution of 150–200 cc (one water glass) of Turkuvaz Bat Power in 20 liters of water is prepared. Starting from fruit formation, repeat at least 3 times every 20–25 days. Leaves, branches, and the trunk are washed by spraying. Foliar applications should be made in the cool, close to the evening hours or early morning hours. When the dilution runs out, a new one is prepared and continued.
For plants such as parsley, arugula, cress, dill, start with 2 liters per decare via drip when sprouting begins, and continue every 10–12 days. Spray foliarly with 500–600 cc in 100 liters of water every 15–20 days.
For tea plants, the application is done from the soil. A mixture of 1 liter of Turkuvaz Bat Power in 20 liters of water is prepared 20–22 days before the first, second, and third harvests. 3–4 liters of the mixture are applied from the soil to a 1 square meter area.
For cultivated mushrooms, during all flush periods, a mixture of 2–3 liters of fertilizer in 100 liters of water is applied to a 100–120 m2 area by misting.
For cotton plants, a mixture of 20 liters of fertilizer in a 1000-liter spraying machine is applied to 25–30 decares during cool hours when the cotton has 4–5 leaves, during flowering, and during the squaring stage.
In green areas, alfalfa, vetch, and other forage plants, 2–3 liters per decare are applied via the sprinkler fertilizer tank for the last 20 minutes after every mowing, followed by running clean water for 10–15 minutes and then shutting down the system. If there is no sprinkler system, a mixture of 20 liters in 1 ton of water is made after every mowing and sprayed to a 10–15 decare area with a spraying machine.